3M™AccuSpray Series 10, 10G and 11 Series
The foundation of the 3M™AccuSpray paint guns. 3M™AccuSpray 10, 11 and 12s guns are molded in two precision-shaped halves with large, sweeping air passages. Air turbulence is eliminated by design to deliver complete atomization. The widest range of coatings will spray perfectly. The large, sweeping passages also allow the unrestricted low pressure air to flow through the gun without pressure loss. When using a turbine, this means maximum pressure with the greatest amount of control right where it's needed - at the point of atomization. When using compressed air, this means minimal air expansion for maximum paint savings.
3M™AccuSpray offers a selection of fluid cup designs .5 Pint Cup, 1 Qrt Standard Cup and the 3M™ PPS™ Cup System. Add your choice and at the same time select your desired Nozzle size and Air Cap. A selected number of the 3M™AccuSpray Air Cap are available made using Delrin. Orselect to purchase our 36-Propack.
About Us | Site Map | Policy | Contact Us
©2007 US Diversified Tech, LLC