3M™AccuSpray 1/2 Pint Cup & Parts
3M™AccuSpray now offers two different 1/2 Pint Cups. The standard 41-11 (shown) has a plastic body with a aluminum paint pick-up tube. The new 41-14 has a plastic pick-up tube. Only the 41-11 cup has available the option of purchasing replacement cups and storage caps.
3M™AccuSpray 1 Qrt Cup & Parts
3M™AccuSpray now only offers the 41-22 standard teflon coated quart cup. AccuSpray cups supply fluid via a pressurized 1:1 pressure ratio. The check valve must be connected from the cup to the air stem on the hand gun to function properly. If you connect the tube without a check valve the cup will spudder on each pull of the trigger as that air pressurizes the cup. When you are not pulling the trigger you loose the pressure in the cup.
3M™AccuSpray 2 Qrt Cup & Parts
3M™AccuSpray 2 quart parts list will be added. To purchase the part you need enter the part number into the below data base search form for pricing and to place an order.
- 1 - 42-03 2 Quart Cup Assembly
- 2 - 94-133 2 Quart Cup Cover Assembly
- 3 - 94-121 2 Quart Cup Only
- 4 - 94- 071 Handle
- 5 - 94-099 Fluid Outlet Fitting
- 6 - 94-094 Fitting - Threaded, Flairless
- 7 - 94-025 Nut -3/8" NPS Swivel
- 8 - UH-866 Nut - Jam
- 9 - 94-089 Stem - Relief valve
- 10 - 94-090 Spring - Relief valve
- 11 - 94-122 Gasket 2 Quart
- *12 - 94-286 Check Valve Replacement Kit
- 13 - 94-262 Check valve
- 14 - 94-263 Springs
- 15 - 94-261 Bracket
- *16 - UH-1063 Screw #8 -32x1/4"As
- 42-330 2 Qt. Cup w/ Flow-Thru Fluid Regulator
- 42-230 2 Qt. Cup w/ Dual Regulator
- 42-337 2 Qt. Cup w/ Flow-Thru Regulator; 6' Hoses
- 42-237 2 Qt. Cup w/ Dual Regulators; 6' Hoses *Use required screw discard other
About Us | Site Map | Policy | Contact Us
©2007 US Diversified Tech, LLC